Bend the light.
Skip the shadows.
A 44″ flexible LED strip that holds any shape you give it, so light finally reaches where your hands already are — deep in the engine bay, behind the dash, under the panel.
Everything a rigid work
light can't do.
Six things about the FlexPro that come straight from the spec sheet, not the marketing department.
Bends and holds
Twist the 44″ body into any shape and it stays put. Engineered to flex and re-flex without stressing the internal LED strip.
3 brightness levels
Low, medium and high — 300, 600 and 900 lumens — so you're never stuck with one intensity for every job.
Full strip or focused beam
Light the entire run for wide coverage, or narrow it to one section for detail work — no separate flashlight required.
Hands-free hook
A built-in hanging hook mounts to a hood, lift or frame rail, so both hands stay on the job, not the light.
2.5-hour recharge
A 2600 mAh lithium-ion cell runs up to 7 hours and refills from empty in 2.5, through the handle-end port and included wall charger.
Sealed silicone sheath
The flexible silicone body seals the 57-SMD LED strip against shop grime, oil and the daily bending it's built for.
Drop your own
product photos in.
Placeholder slots sized for a real gallery — one hero shot and four supporting angles or lifestyle photos.
Dial in the beam
before you buy it.
The two controls that matter on the real unit — brightness and coverage — mapped here so you can see what they actually change.
The FlexPro,
in full.
SKU COILUX-01. Every number the way it appears on the datasheet.
| Length | 44″ |
| Light Type | LED, 57 SMD |
| Color Temperature | ~4000K |
| Brightness Levels | 300 / 600 / 900 lm |
| Lighting Control | Full strip → partial |
| Battery | Li-ion, 2600 mAh |
| Voltage | 11.1 V |
| Battery Life | Up to 7 hrs |
| Charge Time | 2.5 hrs from empty |
| Sheath Material | Silicone |
What's in the box
- 1× Coillux FlexPro LED Flashlight Stick
- 1× Wall Charger (Type A plug)
- Built-in hanging hook & handle-end charge port
Made for the places
a beam can't turn.
Anywhere a job site needs light bent around a corner instead of pointed at one.
Engine bays
Loop it around a manifold or drape it over a shroud to flood the whole bay in even light.
Behind the dash
Feed the tip into wiring cavities and bend it back on itself where a rigid light can't turn.
Inspections & diagnostics
Narrow the beam to one section of the strip to check a single connector or seam up close.
Hands-free repairs
Hang it from the hook and work a two-handed job with the light already aimed where it needs to be.
Questions from the
service counter.
What makes this different from a regular flashlight?
Will the light stay in place after bending it?
Can it be used hands-free?
Can I light one area instead of the whole strip?
How long does the battery last, and how long to recharge?
Does it use replaceable batteries?
Will bending it damage the LEDs over time?
Made for the people
who fix things.
How different trades put a light that bends to work.
Mechanics
Loop it around a manifold or drape it over the radiator shroud to light the whole engine bay, then hook it to the bonnet and keep both hands on the job.
Auto electricians
Feed it behind the dash or along a loom to trace a wiring fault, and narrow the beam to one section when you're checking a single connector.
Fleet & diesel techs
Up to 7 hours of runtime covers a long run of inspections, and a 2.5-hour recharge has it ready again for the next shift.
Ready when the next job is.
In stock & ready to ship · 90-day risk-free trial